Accessories

Exclusive!

DOPS Base Set - 20mm

DOPS bases with a 20mm diameter - ready to use, no need to break or snap out of an injection molded frame!The bases have one textured side and one side with a 1mm deep inset. The textured side provides optimal bonding between the glue and the miniature or basing material. The side with the 1mm deep inset is designed for gluing either magnets or metal washers to magnetize the miniature and also for metal miniatures with puddles on their feet, which you can glue 1mm deeper and fill the rest with basing material to ensure the miniatures feet are level with the base.Material: Polylactide Acid (PLA)Important Note:Attention! Not suited for children under 14 Years.Choking Hazard - Risk .This product is not a Toy.***The shade of gray may vary from the product shown, depending on the production batch. (Lighter or darker)Designed by Desk-Ops

From €1.99*

Details

Exclusive!

DOPS Base Set - 25mm

DOPS bases with a 25mm diameter - ready to use, no need to break or snap out of an injection molded frame!The bases have one textured side and one side with a 1mm deep inset. The textured side provides optimal bonding between the glue and the miniature or basing material. The side with the 1mm deep inset is designed for gluing either magnets or metal washers to magnetize the miniature and also for metal miniatures with puddles on their feet, which you can glue 1mm deeper and fill the rest with basing material to ensure the miniatures feet are level with the base.Material: Polylactide Acid (PLA)Important Note:Attention! Not suited for children under 14 Years.Choking Hazard - Risk .This product is not a Toy.***The shade of gray may vary from the product shown, depending on the production batch. (Lighter or darker)Designed by Desk-Ops

From €2.49*

Details

Exclusive!

DOPS Base Set - 25x50mm

DOPS bases with 25x50mm size - ready to use, no need to break or snap out of an injection molded frame!The bases have one textured side and one side with a 1mm deep inset. The textured side provides optimal bonding between the glue and the miniature or basing material. The side with the 1mm deep inset is designed for gluing either magnets or metal washers to magnetize the miniature and also for metal miniatures with puddles on their feet, which you can glue 1mm deeper and fill the rest with basing material to ensure the miniatures feet are level with the base.Material: Polylactide Acid (PLA)Important Note:Attention! Not suited for children under 14 Years.Choking Hazard - Risk .This product is not a Toy.***The shade of gray may vary from the product shown, depending on the production batch. (Lighter or darker)Designed by Desk-Ops

From €3.39*

Details

Exclusive!

DOPS Base Set - 30mm

DOPS bases with a 30mm diameter - ready to use, no need to break or snap out of an injection molded frame!The bases have one textured side and one side with a 1mm deep inset. The textured side provides optimal bonding between the glue and the miniature or basing material. The side with the 1mm deep inset is designed for gluing either magnets or metal washers to magnetize the miniature and also for metal miniatures with puddles on their feet, which you can glue 1mm deeper and fill the rest with basing material to ensure the miniatures feet are level with the base.Material: Polylactide Acid (PLA)Important Note:Attention! Not suited for children under 14 Years.Choking Hazard - Risk .This product is not a Toy.***The shade of gray may vary from the product shown, depending on the production batch. (Lighter or darker)Designed by Desk-Ops

From €4.49*

Details

Exclusive!

DOPS Base Set - 40mm

DOPS bases with a 40mm diameter - ready to use, no need to break or snap out of an injection molded frame!The bases have one textured side and one side with a 1mm deep inset. The textured side provides optimal bonding between the glue and the miniature or basing material. The side with the 1mm deep inset is designed for gluing either magnets or metal washers to magnetize the miniature and also for metal miniatures with puddles on their feet, which you can glue 1mm deeper and fill the rest with basing material to ensure the miniatures feet are level with the base.Material: Polylactide Acid (PLA)Important Note:Attention! Not suited for children under 14 Years.Choking Hazard - Risk .This product is not a Toy.***The shade of gray may vary from the product shown, depending on the production batch. (Lighter or darker)Designed by Desk-Ops

From €4.89*

Details

Exclusive!

DOPS Base Set - 60mm

DOPS bases with a 60mm diameter - ready to use, no need to break or snap out of an injection molded frame!The bases have one textured side and one side with a 1mm deep inset. The textured side provides optimal bonding between the glue and the miniature or basing material. The side with the 1mm deep inset is designed for gluing either magnets or metal washers to magnetize the miniature and also for metal miniatures with puddles on their feet, which you can glue 1mm deeper and fill the rest with basing material to ensure the miniatures feet are level with the base.Material: Polylactide Acid (PLA)Important Note:Attention! Not suited for children under 14 Years.Choking Hazard - Risk .This product is not a Toy.***The shade of gray may vary from the product shown, depending on the production batch. (Lighter or darker)Designed by Desk-Ops

From €2.49*

Details

Exclusive!

DOPS Mixed Bases Set

Base Height: 3mm height

DOPS mixed Bases Set - Best Bang for your Buck!Ready to use, no need to break or snap out of an injection molded frame!Included are the following Bases:- 32x 25mm Bases- 10x 25x50mm Bases- 10x 40mm Bases- 5x 60mm BasesThe bases have one textured side and one side with a 1mm deep inset. The textured side provides optimal bonding between the glue and the miniature or basing material. The side with the 1mm deep inset is designed for gluing either magnets or metal washers to magnetize the miniature and also for metal miniatures with puddles on their feet, which you can glue 1mm deeper and fill the rest with basing material to ensure the miniatures feet are level with the base.Material: Polylactide Acid (PLA)Important Note:Attention! Not suited for children under 14 Years.Choking Hazard - Risk .This product is not a Toy.***The shade of gray may vary from the product shown, depending on the production batch. (Lighter or darker)Designed by Desk-Ops

€12.99*

Details

Exclusive!

HAYWIRE Token Set

Exclusive Token Set for the HAYWIRE Tabletop Wargaming Rules.Amounts directly chosen and compiled with Martin aka The Solo Wargamer, author of the HAYWIRE rulebook. Includes the following Items.:- 1x Scatter Tool- 6x Spawn Tokens (1-6 je 1x)- 36x Pinned & Suppressed Tokens (1-6 je 6x)- 1x Objective Token- 2x False-Objective Token- 5x Dead-Body Token- 10x Overwatch Token- 3x Hidden Token- 6x Injured Token- 6x Downed TokenGet the free HAYWIRE Rulebook here!Material: Polylactide Acid (PLA)Important Note:Attention! Not suited for children under 14 Years.Choking Hazard - Risk .This product is not a Toy.Tokens are delivered in multicolor (not painted). ***The shade of gray may vary from the product shown, depending on the production batch. (Lighter or darker)Size of the Status Tokens is 25mm for referenceDesigned by Urban Scatter GamingDesk-Ops is the official Partner of Urban Scatter Gaming

€24.49*

Details

Heretic Legion Dice Tower

Dice Tower designed to be used as Terrain to outfit your Trench Crusade Game Setup!Fits best 28-32mm Miniatures & Terrain, but obviously not limited to it only!Check dimension in the Graphic! ⬆Material: Polylactide (PLA)Important Note:Attention! Not suited for children under 14 Years.Choking Hazard - Risk .This product is not a Toy.will be supplied unpaintedWe recommend using CA / Superglue for assembly.Glue is not included. Designed by Stormforge Miniatures.Desk-Ops is an officially licensed Retailer of Stormforge Miniatures.

€23.49*

Details

Holographic Sticker "320 - Blaze it"

Holographic sticker with "320 - Blaze it" GraphicDimensions: 75 x 63mm Each sticker is printed from high quality holographic vinyl with a permanent adhesive and glossy finish and coated with a protective laminate that makes the stickers resistant to fading, scratches, tearing and water.Designed by Desk-Ops.

€3.49*

Details

Holographic Sticker "Desk-Ops Logo"

Holographic sticker with the Desk-Ops logo Dimensions: 75x30mm Each sticker is printed from high quality holographic vinyl with a permanent adhesive and glossy finish and coated with a protective laminate that makes the stickers resistant to fading, scratches, tearing and water.Designed by Desk-Ops.

€1.49*

Details

US EOD - IED Tokens & Marker

Scale: 20 mm

Scales and size are as follows: - 20mm ~ 1:72 - 28mm ~ 1:56 - 32mm ~ 1:52 - 54mm ~ 1:35Material: Photopolymer ResinImportant Note:Attention! Not suited for children under 14 Years.Choking Hazard - Risk .This product is not a Toy.Models will be supplied unpainted.We recommend using CA / Superglue for assembly.Glue is not included. Designed by Black Hills Games.Desk-Ops is an officially licensed Retailer of Black Hills Games.

Variants from €3.49*

€4.49*

Details

Vinyl Sticker "320 - Blaze it"

Vinyl sticker with "320 - Blaze it" GraphicDimensions: 75 x 63mm Each sticker is printed from high quality vinyl with a permanent adhesive and glossy finish and coated with a protective laminate that makes the stickers resistant to fading, scratches, tearing and water.Designed by Desk-Ops.

€2.49*

Details